Asphalt is one of the most robust paving materials available worldwide and is used widely because of its long-lasting and sturdy properties. This type of Paving is mainly made up of gravel and rocks combined with a binding material made of crude oils. This finding material is an essential element in maintaining and increasing the life of the asphalt paving. Unfortunately, asphalt binder can be weakened quickly over time due to exposure to external forces like wear and tear, chemicals, heavy traffic, rain, and UV rays. Ultimately, sealcoating protects your asphalt pavement from wear and tear due to heavy vehicle traffic, weather, and other hazardous elements.
Sealcoating is a maintenance procedure where a protective layer of asphalt emulsion is applied over your existing asphalt surface. This allows increased protection against outside elements like destructive chemicals, rain, UV rays, and other hazards. In addition, sealcoating provides a smooth, slip-resistant, ebony finish to the asphalt surface when applied following the manufacturer's instructions. Finally, Sealcoating improves your pavement's appearance by providing a more aesthetically pleasing look on your parking lot or driveway.
Seal coats are products or acrylic coatings made from bitumen. They are produced in a liquid asphalt emulsion that contains water, polymer additives, silica sand, and other proprietary fillers. You can apply it to the pavement with a squeegee, spraying, or brushing. If sealcoating is applied to your pavement regularly, it will increase your asphalt pavement's life by more than double its original life expectancy.
Experts recommend sealcoating your asphalt paved surfaces within one year of initial installation. Then, for further maintenance, sealcoating should be applied to your asphalt pavement every two to three years for the best protection possible. It is essential to remember that sealcoating is a maintenance process and not a repair process. If you have cracks, potholes, or other damages to your pavement, you should repair these issues before initiating the sealcoating process.
The seal coating process provides extended life to your pavement and is much less expensive than other maintenance procedures, especially when regularly and properly applied. In addition, sealcoating prevents oxidation, discourages water intrusion and damage, and provides aesthetic appeal. Do you maximize your sealcoating benefits are experts on sealcoating in Orlando offered the following tips for extending the life of your pavement and maintaining the best performance possible:
Apply at least two coats of sealant during the seal coating process
Do not apply sealcoating if rain is forecasted within the next 24 hours
Newly applied sealcoating should cure for at least 24 hours before allowing vehicle traffic
Following these tips will allow for optimal protection from your seal coating process. Sealcoating will enable you to enjoy your asphalt paving's full potential functionally and aesthetically. Contact us today if you need sealcoating in Orlando. We have the experience and expertise to get the job done right and leave you satisfied.
